The DC Hipot Tester ST5680 tests for reliable insulation with a waveform by applying a high voltage to the object under test. The instrument applies a DC voltage between test locations and measures leakage current to determine insulation performance.
- Verify battery safety and insulation performance using the waveform.
- High-spec model specifically designed for DC withstand voltage testing. With support for an array of delivery inspections.
- Features arc detection and contact check functions to prevent shipment of defective batteries.
Main functions |
DC Hipot test, Insulation resistance test, Breakdown voltage test, Waveform display functionality, Arc discharge detection, Contact check function See "Various Tests and Functionality" table for details |
List of other features |
Interlock, GFI, Auto discharge, Offset cancellation, Set voltage modification during testing, Momentary out, Command monitor, I/O handler test, Key lock, Self-check, Calibration deadline check, EXT SW (Remote control) |
Operating temperature and humidity range |
0°C to 40°C (32°F to 104°F), 80% RH or less (non-condensing) |
Standards |
Safety: IEC 61010 EMC: IEC 61326 Class A |
Power supply |
100 to 240 V AC |
Power consumption |
Approx. 180 VA Power supply conditions are 220 V power supply voltage, 50 Hz/60 Hz power supply frequency, DC withstand voltage test mode, 2.5 kV test voltage, and 5 mA load current (500 kΩ load resistance). |
Maximum rated power |
800 VA |
Interface |
Communications: USB, LAN, EXT I/O Options: RS-232C (Z3001), GP-IB (Z3000) Memory: USB drive |
Dimensions and mass |
Approx. 305 mm (12.01 in) W × 142 mm (5.59 in) H × 430 mm (16.93 in) D (excluding protruding parts), Approx. 10 kg (352.7 oz) |
Included accessories |
Power cord ×1, CD ×1 (PDF: Instruction Manual, Communication Instruction Manual), EXT I/O male connector ×1, EXT I/O connector cover ×1, Custom-made interlock-canceling connector for the EXT I/O ×1, Startup Guide ×1 |
